A man has been sentenced to 18 weeks in prison after a worker received serious injuries from an electric shock.

Swansea Crown Court heard that, on 12 March 2014, Mr Hearne, under instruction from George Jones, sustained serious injuries whilst plugging a tyre stripping machine into a wall socket. The incident, which took place at Carew Cars, Carew Airfield, Pembrokeshire, could easily have led to a fatality.

An investigation by the Health and Safety Executive (HSE) found that the electrical installation at the unit in Carew Airfield operated by George Jones as part of his scrap metal business was unsafe and was more suited to a domestic premise. The socket in use was in poor condition with exposed wires. The roof of the building had holes in it and there was evidence of water ingress on the wall behind the socket which contributed to the incident.

George William Edward Jones of Strawberry Fields, Pembrokeshire pleaded guilty to breaching Section 4 of the Health and Safety at Work etc. Act 1974, and was sentenced to 18 weeks in prison to run concurrently with his existing sentence.

Speaking after the hearing, HSE inspector Anne Marie Orrells said: “This case highlights the importance of regular proactive maintenance and inspection of work equipment, including electrical installations, to ensure that they do not deteriorate to the extent that it puts people at risk.

“In this case, George Jones failed to effectively maintain equipment and it could have resulted in a fatal injury.”

Notes to Editors:

1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. We prevent work-related death, injury and ill health through regulatory actions that range from influencing behaviours across whole industry sectors through to targeted interventions on individual businesses. These activities are supported by globally recognised scientific expertise. www.hse.gov.uk
2. More about the legislation referred to in this case can be found at: www.legislation.gov.uk/
3. HSE news releases are available at http://press.hse.gov.uk

Media Enquiries

0151 951 5987 media.enquiries@hse.gov.uk

HSE Out of Hours: 0151 922 1221

A lead recycling company was sentenced after a worker was trapped under a load of falling scrap lead.

Luton Magistrates’ Court heard how on 5 May 2016 an employee of H J Enthoven Ltd was operating the overhead crane, lifting a bin containing scrap lead when the bin slipped, emptying its contents onto the crane operator, trapping and injuring him.

An investigation by the Health and Safety Executive (HSE) found that the work was not suitably planned and supervised by a competent person or carried out in a safe manner.

H J Enthoven Ltd of South Darley, Matlock pleaded guilty to breaching Section 2(1) of the Health and Safety at Work etc Act 1974 and has been fined £200,000 and ordered to pay costs of £ 6509.69.

Speaking after the hearing HSE inspector Rubeena Surnam said: “This incident could so easily have been avoided if the company had properly planned the work and implemented the control measures identified.

“Companies should be aware that HSE will not hesitate to take appropriate enforcement action against those that fall below the required standards.”

Notes to Editors:

1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. We prevent work-related death, injury and ill health through regulatory actions that range from influencing behaviours across whole industry sectors through to targeted interventions on individual businesses. These activities are supported by globally recognised scientific expertise. hse.gov.uk
2. More about the legislation referred to in this case can be found at: legislation.gov.uk/
3. Further HSE news releases are available at press.hse.gov.uk

A road resurfacing company was fined £15,400 after an employee was run over by a road roller.

Ayr Sherriff Court heard that on 3 November 2015 an employee of Newlay Civil Engineering Ltd reversed a road roller over the leg of fellow employee, Thomas Shaw. The incident happened at Knockbreck Road, Straiton in South Ayrshire, when the road was undergoing re-surfacing work.

An investigation by the Health and Safety Executive (HSE) found that the vehicle in question was operating without a flashing beacon and the reversing alarm was not working.

Newlay Civil Engineering Ltd pled guilty to breaching Regulation 5(1) of the Provision and Use of Work Equipment Regulations 1998 and was fined £15,400.

Speaking after the hearing HSE principal inspector, Graeme McMinn said:

“This case highlights the importance of regular pro-active maintenance and pre-use inspection of work equipment, including flashing beacons and reversing alarms.

“In this case, Newlay Civil Engineering Ltd failed to effectively maintain their road roller and it could easily have resulted in a fatality.”

Notes to Editors:

1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. We prevent work-related death, injury and ill health through regulatory actions that range from influencing behaviours across whole industry sectors through to targeted interventions on individual businesses. These activities are supported by globally recognised scientific expertise. hse.gov.uk
2. More about the legislation referred to in this case can be found at: legislation.gov.uk/
3. HSE news releases are available at http://press.hse.gov.uk