A liquified petroleum gas (LPG) service provider has been fined after a worker suffered serious burn injuries when an LPG vessel ignited.

Worcester Magistrates’ Court heard that on 8 June 2016 an unsecured LPG vessel that an employee was manoeuvring struck another vessel, resulting in the release of LPG at high pressure which then ignited. The S & E LPG Limited worker was caught by the flames. The fire spread to other vessels stored nearby, destroyed a workshop 10 metres away and lasted more than 24 hours.

An investigation by the Health and Safety Executive (HSE) into the offence found empty LPG vessels had not been stored correctly, on and before the date of the incident, and still had a fire and explosion risk. Well established industry standards were not followed.

HSE also found the LPG vessel had been moved from Aylesbury to Two Shires Road, Honeybourne, on 11 May 2016, while containing hundreds of litres of LPG. The vessel was not an approved container for transportation of such a large quantity of LPG. This delivery posed a significant risk of fire and explosion on a public highway.

S & E LPG Limited of Two Shires Road, Honeybourne, Evesham, Worcestershire pleaded guilty of breaching Regulation 5 of The Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations 2009 and Section 3 of the Health and Safety at Work Act 1974. The company has been fined £26,600 and ordered to pay costs of £3550.90.

Speaking after the hearing HSE Inspector Wai-Kin Liu said “The worker’s injuries were life changing and he could have easily been killed. This serious incident and devastation could have been avoided if industry well established standards had been put in place”.

Notes to Editors:

1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. It helps Great Britain work well by applying a broad range of regulatory interventions and scientific expertise, to prevent work-related death, injury and ill-health. It does so through research, information and advice, promoting training, new or revised regulations and codes of practice, and working with local authority partners by inspection, investigation and enforcement. hse.gov.uk

2. More about the legislation referred to in this case can be found at: legislation.gov.uk

3. HSE news releases are available at http://press.hse.gov.uk

Journalists should approach HSE press office with any queries on regional press releases.

Journalists should approach HSE press office with any queries on regional press releases.

Construction projects across Britain are being urged to act now to ensure the health and safety of their workers is protected as the second phase of a targeted inspection initiative gets underway today.

The Health and Safety Executive (HSE) says 43 workers were fatally injured in 2015/16, and an estimated ten times that number died from construction related ill-health, with a further 65,000 self-reported non-fatal injuries.

HSE is now asking every construction contractor, client and designer to ensure they are not adding to this unacceptable toll of harm by failing to manage well-known risks.

In addition to things such as falls from height, the campaign will focus on control of harmful dusts including respirable silica from concrete, brick and stone, asbestos and wood dust, as well as work at height, structural safety, materials handling, good order and welfare provision.

HSE points to the mis-conception that health issues cannot be controlled in construction. It says harmful dust, whether silica or wood, is a serious issue and can be managed effectively with the right design, equipment and training. Health effects may not be immediate, but the ultimate impact on workers and their families can be devastating.

HSE carried out over 2000 inspections during the first phase of the initiative earlier this year with action being taken to address these issues in almost half of visits.

HSE’s Chief Inspector of Construction and Director of Construction Division Peter Baker commented: “In phase 1 of this campaign HSE’s inspectors found lots of good examples of small sites working safely and protecting workers health from exposure to harmful dusts, proving it can be done. My message to smaller businesses is don’t wait for an accident or a visit from an HSE inspector – learn from the success of others and act now.

“Nearly half of construction fatal accidents and injuries reported to HSE involved refurbishment work.

“Some small refurbishment sites continue to cut corners and not properly protect their workers resulting in an unacceptable number of deaths and injuries each year.”

Notes to Editors:

1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. It helps Great Britain work well by applying a broad range of regulatory interventions and scientific expertise, to prevent work-related death, injury and ill health. It does so through research, information and advice, promoting training, new or revised regulations and codes of practice, and working with local authority partners by inspection, investigation and enforcement. www.hse.gov.uk
2. More information about harm in the construction industry can be found at: http://www.hse.gov.uk/statistics/industry/construction/ HSE news releases are available at http://press.hse.gov.uk
3. Free HSE guidance is available for construction employers and workers at www.hse.gov.uk about how to manage risks and prevent harm, as well as maintain productivity and business viability.
4. Join the conversation online at @H_S_E on twitter and SaferSites on Facebook.
5. For more information on HSE’s campaigns visit: http://www.hse.gov.uk/strategy/index.htm for Helping Great Britain Work Well and http://www.hse.gov.uk/gohomehealthy/index.htm for Go Home Healthy.

Heal

A North-West specialist sheet metal fabrication company has been fined after an employee was left seriously injured when metal sheets fell onto his leg.

Liverpool Magistrates’ Court heard how, on 5 February 2016, the employee and his supervisor were searching for materials within the workshop of Shearfab Limited when metal sheets that were not safely secured fell onto the employee’s leg. The employee suffered a fracture to his left leg that required an operation to insert a large metal plate with nine screws.

The HSE investigation found that the company, despite previously being served improvement notices, had no system to ensure the sheet metal was always stored safely, the company had fixed and mobile racking, but there was no system in place to ensure they were used effectively.

Shearfab Limited, of Oldgate, St Michaels Industrial Estate, Widnes, pleaded guilty to breaching Section 2 (1) of the Health and Safety at Work etc. Act 1974, and was fined £10,000 with full prosecution costs.

HSE inspector Kate Lyon said after the hearing: “This was an entirely preventable incident. There were a number of failings however the underlying cause was poor health and safety management. Hopefully others can learn from this incident and adopt safer and better working practices. Metal plates and sheets are most stable when laid flat. When stacked on edge they should always be adequately supported in suitable storage equipment, such as toast racking.”

More information regarding safe storage and handling of steel and other metal stock can be found at http://www.hse.gov.uk/pubns/priced/hsg246.pdf

Notes to editors 

1. The Health and Safety Executive (HSE) is Britain’s national regulator for workplace health and safety. It aims to reduce work-related death, injury and ill health. It does so through research, information and advice, promoting training; new or revised regulations and codes of practice, and working with local authority partners by inspection, investigation and enforcement. www.hse.gov.uk
2. More about the legislation referred to in this case can be found at: www.legislation.gov.uk/
3. HSE news releases are available at http://press.hse.gov.uk